REAR DISC INSTALLATION IN BULLET

THE PROCESS IS NOT THAT DIFFICULT WE JUST NEED 3 THINGS:-

1-REAR SWING ARM OF ANY BULLET 500CC OR THUNDERBIRD MODEL(having rear disc break).

2-A REAR DISC PLATE.

3-CALIPER SET WITH SOME BRAKE OIL OBVIOUSLY.

*AT FIRST WE NEED TO DETACH THE OLD SWING ARM FOR THAT WE NEED TO REMOVE REAR WHEEL, 

*AFTER REMOVING SWINGARM REPLACE IT WITH THE NEWER ONE, 

*ATTACH THE DISC PLATE TO THE RIM AND INSTALL THE NEW WHEEL,

*THAN INSTALL THE CALIPER OVER THE DISC AND BOLT THE REAR LIGHT SWITCH UNDER THE BREAK LEVER AND THE BREAK OIL CONTAINER BEHIND THE SPACE AND BOLT IT DECENT TIGHT BUT NOT TOO TIGHT.